The Fats, Oils, and Grease Program outlines the wastewater pretreatment requirements for Food Service Establishments (FSE) and other commercial facilities that discharge fats, oils and grease in their wastewater flow. All new and existing Class III and IV FSEs that discharge fats, oils and grease in their wastewater must comply with the Connecticut Department of Environmental Protection’s General Permit for the Discharge of Wastewater Associated with Food Service Establishments by JULY 1, 2011. Upon installation of the required properly sized Active Grease Recovery Unit (AGRU) or outdoor in-ground minimum 1,000 gallon interceptor the FSE must complete a Facility Registration form and schedule an inspection with MDC to receive approval. Any questions or to schedule an inspection please contact Magen Bakaj at 860-278-7850 ext 3239 or by email at email@example.com.
Impacts of Fats, Oils and Grease buildup on an MDC sewer
An annual fee of $80.00 will be billed to each of the Class III and IV Food Service Establishments (FSEs) in the Metropolitan District. This fee is associated with the review and approval of facility registration forms as well as inspections. The Annual Fee invoice will be mailed and payment is due within 30 days of the issuance of the invoice.
FSE registration or variance approvals will expire three years after the issuance date. The FPE shall submit a Registration or Variance Application form 30-days prior to the expiration of the FPE’s current registration.
The MDC will perform inspections of the FSEs to determine compliance with the Department of Energy and Environmental Protection’s (DEEP) General Permit for the Discharge of Wastewater Associated With Food Service Establishments. Each day that a violation continues shall be a separate occurrence of the violation according to section S15 of the MDC Sewer Ordinances.
The Inspection Violation Fees are as follows:
|Failure to Submit Registration or Variance Applications||$100|
|Failure to maintain records in proper order||$100|
|Failure to maintain outdoor or indoor grease removal devices in
properly working order
|Failure to clean outdoor or indoor grease removal devices quarterly or when 25% of the depth of the trap is filled with food solids and FOG, whichever comes first||$200|
|Failure to properly dispose of brown and/or yellow grease||$200|
|Source of sanitary sewer overflow (minimum) *||$1000|
*actual costs will be billed to the faclity for time and materials related to the SSO
The payment of the fee will be required 30 days following issuance of the notice of violation invoice.
Violation Correction Schedule
|Equipment not registered||30 days|
|Installation violation (outdoor or indoor)||90 days|
|Operational violations||30 days|
|Failure to maintain written records of trap cleanings||30 days|
|Disallow an inspection||30 days|
|Failure to maintain indoor and outdoor grease removal
device in proper working order
|Failure to clean out indoor and/or outdoor grease removal
device as required
|Source of Sanitary Sewer overflow (minimum)||24 hours|
The MDC will perform emergency call outs to relieve grease blockages that result in sewer backups. If MDC determines that the grease problems in the sewer infrastructure were a result of the FPE, the establishment will be billed for the work performed by the MDC to relieve the blockage. The payment of the fee will be due within 30 days of the issuance of the invoice.
All Class III and Class IV Food Service Establishments (FSEs) are required to install either an Active Grease Recovery Unit (AGRU) or a minimum 1,000 gallon outdoor in-ground passive grease interceptor. Specific requirements for these devices are outlined in the General Permit. All of the following fixtures must be connected to either an AGRU or an outdoor passive grease interceptor:
Active Grease Recovery Unit (AGRU)
Active Grease Recovery Units (AGRUs) are relatively small pretreatment units that can be located inside a kitchen to remove grease at the source of generation. These units allow fats, oils, and grease (FOG) to accumulate within the unit while skimmers or pumps remove the FOG from the unit and deposit the material in a separate container for disposal by a grease removal contractor.
All AGRUs shall be maintained in accordance with the manufacturer’s recommendations. This includes a minimum quarterly (four times per year) clean out of the entire unit. The contents of the trap must be placed into a container for grease trap waste (brown grease). A written log and receipts of all cleaning and maintenance of the trap must be maintained on site for review by the MDC.
See links below for the:
An outdoor in-ground grease trap must be emptied at least every three months or whenever 25% of the operating depth of the grease trap/interceptor is occupied by grease and settled solids, which ever is more frequent. Following a minimum one year of operation, the facility may submit a request to the MDC to extend the cleaning beyond the three month period if the facility demonstrates that the level of grease and solids was less than 25% during each of the three month intervals. The facility shall maintain a written log and receipts of all cleaning and maintenance of the trap.
Please see links below for the:
The Standard Specification for MDC outside grease interceptors for kitchens is shown below:
The outdoor grease trap/interceptor specifications are described in Section 5(b)(1) of the General Permit. Installation of a new outdoor grease trap/interceptor shall meet the specifications as described in the General Permit and the MDC specifications.
Food service establishments and facilities that are applicable to this General Permit shall comply based on the following schedule:
All new facilities shall comply with the requirements of the General Permit before initiating such discharge. An existing facility, which begin operation prior to the effective date of the General Permit (September 30, 2005), shall comply with the requirements of the General Permit no later than July 1, 2011.
For additional information and guidance please go to the following link: Best Management Practices and Guidance Manual for Food Preparation Establishments
The Metropolitan District (MDC) may grant a variance of treatment requirements for a FPE for a period of three years. This variance is a waiver of the treatment requirements of Sections 5(b)(1) through 5(b)3, inclusive, of the Department of Environmental Protection’s (DEP) General Permit for the Discharge of Wastewater Associated With Food Preparation Establishments. The applicant must demonstrate there is a limited potential for fats, oils, and grease in the discharge, as well as minimal flow. If the MDC encounters any grease problems in the sewer infrastructure in the area of the establishment, MDC has the right to revoke any variances issued.
Please note the applicant must reapply for a variance approval 30-days prior to the following:
To be considered for a variance, the facility shall complete the Variance Application and attach a complete menu for the establishment. The application shall include a description of the proposed methods for minimizing grease discharged in the wastewater, including employee training, cleaning procedures and interim grease disposal methods.